The Next Generation of Roadway Reflectivity
REFLECT-IT is a complete range of retro-reflective studs, designed to be applied across kerbs, roads, barriers, bridges, tunnels, and structures. Wherever visibility matters, REFLECT-IT brings the surface to life.
Unlike traditional stick-on panels or single-use studs that fade or fail, the REFLECT-IT range is engineered with advanced optics to deliver consistent brightness in all weather conditions, day and night.
Each product is built for strength, durability, and minimal maintenance, making REFLECT-IT suitable for high-speed carriageways, urban streets, safety barriers, and confined environments like tunnels. By extending the life of infrastructure and reducing replacement cycles, it delivers safer networks and lower whole-life costs.
Whether it’s a kerb edge, a guardrail, a parapet, or a carriageway surface, the REFLECT-IT range transforms everyday assets into highly visible guidance systems that help drivers react sooner and protect people.
Brighter guidance. Safer roads.
The Reflect‑IT range delivers high‑performance retro‑reflective guidance for highways, barriers, crossings, airports and industrial sites. Energy‑free, durable, and fast to deploy.
SG Road Studs
RX3
R-360
About REFLECT-IT
REFLECT‑IT is a range of safety critical products designed to transform ordinary highway infrastructure into highly visible guidance assets. Whether applied to concrete medians, steel guardrails, bridge parapets, or carriageway surfaces, REFLECT‑IT products give passive structures an active role in reducing collisions, improving navigation, and protecting people.
Each unit uses precision‑engineered retro‑reflective optics to deliver visibility day and night, in all weather conditions. Compared to legacy prismatic panels or stick‑down studs, REFLECT‑IT optics maintain brightness longer, require less maintenance, and can often be installed at greater spacing, reducing capital costs.
By combining high‑performance reflection with simple installation methods and long service life, REFLECT‑IT helps drivers see hazards sooner and enables asset owners to extend the life of existing infrastructure, minimise disruption, and manage budgets more efficiently. REFLECT‑IT creates safer, smarter, and more sustainable roads without the need for costly reconstruction or disruptive works.
Our Products
-
RX3 Road Stud
The RX3 is a solid-glass road stud engineered for long-life performance on high-speed carriageways. With a 17 mm domed profile and forward-facing optics, it delivers exceptional brightness and durability even under heavy traffic. Designed for cored or milled installation, RX3 provides permanent, low-maintenance guidance on highways, dual carriageways, and trunk roads.
Material: Solid optical glass, 17 mm domed profile
Optics: High-intensity, forward-facing reflection
Installation: Cored/milled into carriageway surface
Application: Highways, dual carriageways, trunk roads
-
SG Road Stud - 14&19mm
The SG Road Stud is a cost-effective, all-glass reflector providing 360-degree visibility for general road delineation. With a 19 mm profile, it offers reliable guidance on urban and secondary routes where multi-directional visibility is key. Installed by coring or milling, it delivers dependable, low-maintenance performance across roundabouts, junctions, and car parks.
Material: Solid glass, 19&14 mm profile
Optics: 360° retro-reflective dispersion
Installation: Cored/milled into carriageway surface
Application: Urban streets, roundabouts, secondary roads, car parks
-
R-360
The R-360 is a compact, full-dome glass reflector designed specifically for recessing into concrete kerbs and structures. With a 50 mm diameter profile, it delivers continuous edge-to-edge delineation along traffic islands, roundabouts, and central reservations. Also suitable for walls, barriers, and parapet structures, the R-360 provides permanent, low-maintenance visibility where surface-mounted markers are unsuitable.
Material: Solid optical glass, 50 mm diameter
Installation: Exclusively core-drilled into concrete surfaces
Optics: 360° retro-reflective dome
Application: Kerbs, traffic islands, parapet walls, concrete barriers
-
R-180
The R-180 is the compact sibling of the RX3, designed for lower-speed A and B roads, junctions, and pedestrian crossings. Its 180-degree optical field provides precise directional reflection in intricate traffic environments. Installed by coring, the R-180 offers bright, durable delineation where controlled guidance is required without full-dome dispersion.
Material: Solid optical glass body
Optics: 180° directional retro-reflectivity
Installation: Cored/milled into carriageway surface
Application: A & B roads, junctions, pedestrian crossings, urban approaches
-
R-360 PRO FULL
The R-360 PRO FULL combines the R-360 glass core with a coloured rubber housing for use on large, high-containment kerbs and barrier systems. It provides strong daytime colour contrast and 360-degree night-time reflectivity for continuous edge definition. Installed via adhesive or mechanical fixing, it offers durable, low-maintenance delineation on motorway medians and heavy-duty structures.
Reflector: R-360
Housing: High-impact coloured rubber body
Installation: Core-drilled and mechanically affixed into the substrate material
Application: High-containment kerbs, heavy-duty barriers, motorway medians
-
R-360 PRO SEMI
The R-360 PRO SEMI uses the same optical core within a reduced-width rubber housing featuring a flat rear section that sits parallel to the back of standard kerbs. It maintains full optical performance while integrating neatly with existing kerb geometry. Providing both daytime colour visibility and night-time reflection, it’s ideal for standard kerb lines, traffic islands, and pedestrian approaches.
Reflector: R-360
Housing: Narrow-profile coloured rubber with flat rear alignment
Installation: Core-drilled and mechanically affixed into the substrate material
Application: Standard kerb lines, traffic islands, pedestrian approaches
-
R-180 PRO STANDING
The R-180 PRO STANDING is a directional, high-intensity reflector designed for mounting to concrete central reservations and barrier faces. Using a 180° glass optic, it is around three times brighter than the R-360 PRO STANDING, making it ideal where extra conspicuity is required. Fixed by adhesive or mechanical fixing, it delivers durable, all-weather delineation on median and tunnel approaches.
Reflector: R-180 directional optic (approx. 3× brighter than R-360 PRO STANDING)
Housing: Upright coloured rubber mount
Installation: Adhesive/mechanical fixing to concrete barriers
Application: Central reservations, high-visibility zones
-
R-360 PRO STANDING
The R-360 PRO STANDING incorporates the R-360 glass optic within a vertical rubber mount for use on concrete central reservation barriers. The design positions the reflector for optimal driver visibility from both directions. It delivers continuous, all-weather delineation across median barriers, tunnels, and structural edges where embedded markers cannot be installed.
Reflector: R-360
Housing: Upright coloured rubber body
Installation: Adhesive/mechanical fixing to concrete barriers
Application: Central reservations, high-visibility zones
-
RX3 - Snow Plowable
The RX3 Snow-Ploughable combines the RX3 glass core with a recessed, plough-resistant housing to withstand winter maintenance operations. It retains the same brightness and durability while protecting the optic from snow-plough impact. Compatible with standard sockets, it provides long-term, high-visibility guidance on highways in snow and ice regions.
Core: RX3 solid-glass optic within protective housing
Design: Recessed, plough-resistant frame
Installation: Cored/milled into carriageway surface
Application: Highways and carriageways in snow/ice regions
-
R-180 - Snow Plowable
The R-180 Snow-Ploughable features a directional glass insert protected by a recessed, plough-safe frame. Designed for A and B roads exposed to snow-clearing and de-icing activity, it provides the same bright, controlled reflection as the standard R-180. The unit ensures reliable, year-round delineation across rural and mountainous routes.
Core: R-180 glass insert within protective frame
Design: Directional, plough-safe recessed housing
Installation: Cored/milled into carriageway surface
Application: Rural & mountain roads, snow-clearance regions
EN 1463 Compliance Statement
All REFLECT-IT™ glass road studs supplied through Bankswood Infrastructure Group are certified in accordance with EN 1463 – Road marking materials – Retroreflecting road studs.
This European Standard specifies both the initial performance (Part 1) and durability (Part 2) requirements for retroreflective road studs used on public highways.
All products within the REFLECT-IT range are tested to EN 1463-1: 2021, and selected models have also been independently tested to EN 1463-2 to confirm long-term durability and performance consistency under real-world conditions.
Certification has been issued by a Notified Body of BSI Group The Netherlands B.V. (No. 2797) in compliance with the EU Construction Products Regulation (305/2011/EU).
Together, these certifications demonstrate that every REFLECT-IT unit delivers verified optical performance, durability, and manufacturing quality suitable for permanent highway and infrastructure applications across the UK and Europe.
Contact us.
To learn more about REFLECT-IT, our other products, and services, or if you have any questions, please do not hesitate to contact our team. You can reach us by completing the form below or using any of the provided methods.